High Build Epoxy Resin Coating


New Manufacturing Hub


FeRFA Type 3 PRIME: Remmers Epoxy BS 2000 SEAL: Epoxy BS 3000




10 days

This new manufacturing hub develops engine technologies set to reduce emissions and set new benchmarks for efficiency.

TPS360 was appointed to create safe and durable flooring for this facility that would no only provide a non-slip solution to constant foot traffic and slow-moving vehicles, but also protection from mechanical and chemical loads.

Remmers Epoxy BS 3000 is a high quality, water-based, pigmented, silk-gloss sealant that can be subject to a variety of indoor and outdoor conditions. It has excellent abrasion resistance and good chemical resistance properties and is ideal for manufacturing and production environments.

For this project, we mechanically prepared the floor using dust free HTC vacuum enclosed diamond grinders and dust extractors to remove all existing floor coatings and any other laitance. Dust collection is a crucial part of the grinding process, from the health point-of-view but also to prevent surrounding areas being filled with dust.


Temperature of the material, air and substrate: from min. +8 °C to max. +30 °C. During the curing process, the applied material was protected from moisture which could impair the surface and impair the adhesion.